I personally have the ROG Strix x570-i gaming (wifi) and I have no issues with the lights being off when shut off (they're easily disabled through the bios) and I don't have any issues with fan curves not sticking (I do it through the MB bios). ![]() The FANS on the radiator should be temperature controlled. That is usually the best for the actual PUMP. Sounds like this is all on you and user error/ignorance instead of the motherboard being bad. The pump port probably doesn't show up in the BIOS because it is a constant 100 profile. Alternatively, there's options in the bios to manually change and set the fan curve. There should be a setting in the ARMORY CRATE program to apply settings/the profile upon windows startup. Why is the lights staying on when it's shutdown a problem? What's a good alternative motherboard? I have a ryzen 5 3600. I have to manually go to ARMORY CRATE and turn on silent profile everytime I boot up. The fan control seems to be busted ever since I had to reset the motherboard CMOS because of a BIOS issue. The power button and RAM light's stay on when the PC is shutdown causing me to always switch it off from the PSU when finished with the PC.Ģ. I don’t mean the RAM trouble shoot light i mean the actual ram rgb lights don’t turn off even when the PC is shut down, also thank you for taking the time to type this. ![]() Should you need to ever boot from another Drive, such as USB, there is a F# Key to press in order to get access to the One Time Boot Options Menu from there you select USB such as for installing an OS via USB Flash Drive. Just ensure the Target OS Drive is the only boot device. I opened Armoury crate and on Aura Sync my motherboard and the accessories arent listed and the Fan control is also gone but i don't need that. Done deal, shouldn't have to change much if anything else. 06-04-2023 12:15 PM Hello, I might not be the first one but 3 weaks ago, my leds on the motherboard and Aio suddenly went to default rainbow mode. Then re-enter the BIOS and enable the proper DOCP/XMP profile for DRAM so your RAM runs as it was designed to per its specs. 2021 ASUS Armoury Crate is a system controlling software that can display real-time. ![]() After a BIOS update, go into the BIOS, select Optimized Defaults, Apply via Save & Exit. But I didnt find any tool on ASUS website to tune the fan speed. As this might lower performance of the old CPUs such as yours. Since you have a Ryzen 3600, I would also ensure to update your BIOS but not to a BIOS version that is after they added support/fixes for Ryzen 5xxx series. You can disable this so that after your PC does the initial POST + Boot, the LEDS go off and stay off. Oprindeligt skrevet af Bad □ Motha:Most MotherBoards have a BIOS option for "POST LEDS"
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |